Selected Journal Publications Between 2000 – 2009
2009
Wang, Z. L., Naterer, G. F., Gabriel, K. S., Gravelsins, R., Daggupati, V. N., “New Cu–Cl Thermochemical Cycle for Hydrogen Production with Reduced Excess Steam Requirements”, International Journal of Green Energy, vol. 6, pp. 616 – 626, 2009
Naterer, G. F., Adeyinka, O. B., “Imaging Velocimetry Measurements for Entropy Production in a Rotational Magnetic Stirring Tank and Parallel Channel Flow”, Entropy, vol. 11, no. 3, pp. 334 – 350, 2009
Zamfirescu, C., Dincer, I., Naterer, G. F., “Performance Evaluation of Organic and Titanium Based Working Fluids for High Temperature Heat Pumps”, Thermochimica Acta, vol. 496, pp. 18 – 25, 2009
Rosen, M. A., Ajedegba, J. O., Naterer, G. F., “Blade Configuration Effects on Flow Distribution and Power Output of a Vertical Axis Wind Turbine”, International Journal of Energy, Environment and Economics, vol. 17, no. 2, pp. 243 – 300, 2009
Haseli, Y., Naterer, G. F., Dincer, I., “Fluid–Particle Mass Transport of Cupric Chloride Hydrolysis in a Fluidized Bed”, International Journal of Heat and Mass Transfer, vol. 52, pp. 2507 – 2515, 2009
Naterer, G. F., Suppiah, S., Lewis, M., Gabriel, K., Dincer, I., Rosen, M. A., Fowler, M., Rizvi, G., Easton, E. B., Ikeda, B. M., Kaye, M. H., Lu, L., Pioro, I., Spekkens, P., Tremaine, P., Mostaghimi, J., Avsec, A., Jiang, J., “Recent Canadian Advances in Nuclear–Based Hydrogen Production and the Thermochemical Cu–Cl Cycle”, International Journal of Hydrogen Energy, vol. 34, pp. 2901 – 2917, 2009
Duan, X., Naterer, G. F., “Heat Conduction with Seasonal Freezing and Thawing near a Tower Foundation”, International Journal of Heat and Mass Transfer, vol. 52, pp. 2068 – 2078, 2009
Nojoumi, H., Dincer, I., Naterer, G. F., “Greenhouse Gas Emissions Assessment of Hydrogen and Kerosene Fueled Aircraft Propulsion”, International Journal of Hydrogen Energy, vol. 34, pp. 1363 – 1369, 2009
2008
Naterer, G. F., Fowler, M., Cotton, J., Gabriel, K., “Synergistic Roles of Off–peak Electrolysis and Thermochemical Production of Hydrogen from Nuclear Energy in Canada”, International Journal of Hydrogen Energy, vol. 33, pp. 6849 – 6857, 2008
Wang, Z., Naterer, G. F., Gabriel, K., “Multiphase Reactor Scale–up for Cu–Cl Thermochemical Hydrogen Production”, International Journal of Hydrogen Energy, vol. 33, pp. 6934 – 6946, 2008
Naterer, G., “Second Law Viability of Upgrading Industrial Waste Heat for Thermochemical Hydrogen Production”, International Journal of Hydrogen Energy, vol. 33, pp. 6037 – 6045, 2008
Haseli, Y., Dincer, I., Naterer, G. F., “Thermodynamic Performance Analysis of a Combined Gas Turbine Power System with a Solid Oxide Fuel Cell through Exergy”, Thermochimica Acta, vol. 480, no. 1, pp. 1 – 9, 2008
Naterer, G. F., Gabriel, K., Wang, Z., Daggupati, V., Gravelsins, R., “Thermochemical Hydrogen Production with a Copper–Chlorine Cycle, I: Oxygen Release from Copper Oxychloride Decomposition”, International Journal of Hydrogen Energy, vol. 33, pp. 5439 – 5450, 2008
Haseli, Y., Dincer, I., Naterer, G. F., “Thermodynamic Modeling of a Gas Turbine Cycle Combined with a Solid Oxide Fuel Cell”, International Journal of Hydrogen Energy, vol. 33, 5811 – 5822, 2008
Wang, X., Naterer, G., Bibeau, E., “Convective Heat Transfer from a NACA Airfoil at Varying Angles of Attack”, AIAA Journal of Thermophysics and Heat Transfer, vol. 22, no. 3, pp. 457 – 463, 2008
Haseli, Y., Naterer, G. F., Dincer, I., “Comparative Assessment of Greenhouse Gas Mitigation of Hydrogen Passenger Trains”, International Journal of Hydrogen Energy, vol. 33, pp. 1788 – 1796, April 2008
2007
Naterer, G. F., Chomokovski, S. R., “Entropy Based Surface Microprofiling for Passive Near–Wall Flow Control”, Journal of Micromechanics and Microengineering, vol. 17, pp. 2138 – 2147, 2007
Glockner, P. S., Naterer, G. F., “Interfacial Thermocapillary Pressure of an Accelerated Droplet in Microchannels: I. Fluid Flow Formulation”, International Journal of Heat and Mass Transfer, vol. 50, pp. 5269 – 5282, 2007
Adeyinka, O. B., Naterer, G. F., “Measured Turbulent Entropy Production with Large Eddy Particle Image Velocimetry”, Experiments in Fluids, vol. 42, no. 6, pp. 881 – 891, 2007
Wang, X., Bibeau, E., Naterer, G. F., “Experimental Correlation of Forced Convection Heat Transfer from a NACA Airfoil”, Experimental Thermal and Fluid Science, vol. 31, pp. 1073 – 1082, 2007
Wang, X., Naterer, G. F., Bibeau, E., “Convective Droplet Impact and Heat Transfer from a NACA Airfoil”, AIAA Journal of Thermophysics and Heat Transfer, vol. 21, no. 3, pp. 543 – 547, 2007
Glockner, P. S., Naterer, G. F., “Recent Advances in Nano–electromechanical and Microfluidic Power Generation”, International Journal of Energy Research, vol. 31, no. 6, pp. 603 – 618, 2007
Ogedengbe, E. O. B., Naterer, G. F., “Convective Flux Dependence on Upstream Flow Directionality in Finite Volume Computations”, Numerical Heat Transfer A, vol. 51, no. 7, pp. 617 – 633, 2007
Naterer, G. F., “Microfluidic Friction and Thermal Energy Exchange in a Non–Polarized Electromagnetic Field”, International Journal of Energy Research, vol. 31, no. 6, pp. 728 – 741, 2007
Wang, D., Wang, G. G., Naterer, G. F., “Collaboration Pursuing Method for Multidisciplinary Design Optimization Problems”, AIAA Journal, vol. 45, no. 5, pp. 1091 – 1103, 2007
Lui, S. H., Naterer, G. F., “Upper Entropy Bounds for Transient Forced Convection”, Heat and Mass Transfer, vol. 43, pp. 295 – 308, 2007
2006
Ogedengbe, E. O. B., Naterer, G. F., Rosen, M. A., “Slip Flow Irreversibility of Dissipative Kinetic Energy and Internal Energy Exchange in Microchannels”, Journal of Micromechanics and Microengineering, vol. 16, pp. 2167 – 2176, 2006
Naterer, G. F., Lam, C. H., “Transient Response of Two–Phase Heat Exchanger with Varying Convection Coefficients”, ASME Journal of Heat Transfer, vol. 128, no. 9, pp. 953 – 962, 2006
Glockner, P. S., Naterer, G. F., “Surface Tension and Frictional Resistance of Thermocapillary Pumping in a Closed Microchannel”, International Journal of Heat and Mass Transfer, vol. 49, no. 23, pp. 4424 – 4436, 2006
Naterer, G. F., Tokarz, C. D., “Entropy Based Design of Fuel Cells”, ASME Journal of Fuel Cell Science and Technology, vol. 3, no. 2, pp. 165 – 174, 2006
Naterer, G. F., Adeyinka, O. B., “New Laser Based Method for Non–Intrusive Measurement of Available Energy Loss and Local Entropy Production”, Experimental Thermal and Fluid Science, vol. 31, no. 2, pp. 91 – 95, 2006
Naterer, G. F., Tokarz, C. D., “Fuel Cell Exergy Losses of Activation Energy and Cathode Polarization”, AIAA Journal of Thermophysics and Heat Transfer, vol. 20, no. 3, pp. 449 – 456, 2006
Glockner, P. S., Naterer, G. F., “Numerical Simulation of Electrokinetic Flow and Heat Transfer in Microchannels with a Finite Volume Method”, Numerical Heat Transfer A, vol. 49, no. 5, pp. 451 – 470, 2006
2005
Glockner, P. S., Naterer, G. F., “Thermocapillary Based Control of Microfluidic Transport with a Stationary Cyclic Heat Source”, Journal of Micromechanics and Microengineering, vol. 15, pp. 2216 – 2229, 2005
Ogedengbe, E. O. B., Naterer, G. F., “Preconditioned Solver Performance with Compressed Banded Data Format in 3–D Convective Heat Transfer Simulations”, Numerical Heat Transfer A, vol. 48, no. 10, pp. 965 – 985, 2005
Naterer, G. F., Adeyinka, O. B., “Microfluidic Exergy Loss in a Non–polarized Thermomagnetic Field”, International Journal of Heat and Mass Transfer, vol. 48, pp. 3945 – 3956, 2005
Glockner, P. S., Naterer, G. F., “Adaptive Grid Formulation of Thermocapillary Convection in a Microfluidic Two–Phase Flow”, Numerical Heat Transfer B, vol. 48, no. 6, pp. 517 – 541, 2005
Naterer, G. F., “Surface Micro–Profiling for Reduced Energy Dissipation and Exergy Loss in Convective Heat Transfer”, Microscale Thermophysical Engineering, vol. 9, no. 3, pp. 213 – 236, 2005
Adeyinka, O. B., Naterer, G. F., “Entropy Based Metric for Component Level Energy Management: Application to Diffuser Performance”, International Journal of Energy Research, vol. 29, no. 11, pp. 1007 – 1024, 2005
Adeyinka, O. B., Naterer, G. F., “Particle Image Velocimetry Based Measurement of Entropy Production with Free Convection Heat Transfer”, ASME Journal of Heat Transfer, vol. 127, no. 6, pp. 615 – 624, 2005
Glockner, P. S., Naterer, G. F., “Near–Wall Velocity Profile with Adaptive Shape Functions for Turbulent Forced Convection”, International Communications in Heat and Mass Transfer, vol. 32, no. 1, pp. 72 – 79, 2005
Naterer, G. F., Glockner, P. S., Chomokovski, S. R., Richardson, G., Venn, G., “Surface Micro–Grooves for Near–Wall Exergy and Flow Control: Application to Aircraft Intake De–icing”, Journal of Micromechanics and Microengineering, vol. 15, pp. 501 – 513, 2005
Xu, R., Naterer, G. F., “Deterministic Physical Influence Control of Interfacial Motion in Thermal Processing of Solidified Materials”, Experimental Thermal and Fluid Science, vol. 29, no. 2, pp. 227 – 238, 2005
2004
Adeyinka, O. B., Naterer, G. F., “Modeling of Entropy Production in Turbulent Flows”, ASME Journal of Fluids Engineering, vol. 126, no. 6, pp. 893 – 899, 2004
Ogedengbe, E. O. B., Naterer, G. F., “Three–Dimensional Distributed Mass Weighting for Non–Inverted Convective Skew Upwinding”, AIAA Journal of Thermophysics and Heat Transfer, vol. 18, no. 4, pp. 502 – 510, 2004
Naterer, G. F., “Pressure Weighted Upwinding for Flow Induced Force Predictions: Application to Iced Surfaces”, International Journal for Numerical Methods in Fluids, vol. 44, no. 9, pp. 927 – 956, 2004
Naterer, G. F., “Reduced Flow of a Metastable Layer at a Two–Phase Limit”, AIAA Journal, vol. 42, no. 5, pp. 980 – 987, 2004
Ogedengbe, E. O. B., Naterer, G. F., “Non–Inverted Skew Upwind Scheme for Three–Dimensional Convective Transport”, Numerical Heat Transfer B, vol. 46, no. 2, pp. 141 – 164, 2004
Xu, R., Naterer, G. F., “Controlled Interface Acceleration in Unidirectional Solidification”, International Journal of Heat and Mass Transfer, vol. 47, no. 22, pp. 4821 – 4832, 2004
2003
Naterer, G. F., “Dispersed Multiphase Flow with Air–Driven Runback of a Liquid Layer at a Moving Boundary”, International Journal of Multiphase Flow, vol. 29, no. 12, pp. 1833 – 1856, 2003
Wang, D., Naterer, G. F., Wang, G., “Thermofluid Optimization of a Heated Helicopter Engine Cooling Bay”, Canadian Aeronautics and Space Journal, vol. 49, no. 2, pp. 73 – 86, 2003
Naterer, G. F., Camberos, J. A., “Entropy and the Second Law in Fluid Flow and Heat Transfer Simulation”, AIAA Journal of Thermophysics and Heat Transfer, vol. 17, no. 3, pp. 360 – 371, 2003
Naterer, G. F., “Eulerian Three–Phase Formulation with Coupled Droplet Flow and Multimode Heat Transfer”, Numerical Heat Transfer B, vol. 43, no. 4, pp. 331 – 352, 2003
Naterer, G. F., “Temperature Gradient in the Unfrozen Liquid Layer for Multiphase Energy Balance with Incoming Droplets”, ASME Journal of Heat Transfer, vol. 125, no. 1, pp. 186 – 189, 2003
Xu, R., Naterer, G. F., “Controlling Phase Interface Motion in Inverse Heat Transfer Problems with Solidification”, AIAA Journal of Thermophysics and Heat Transfer, vol. 17, no. 4, pp. 488 – 497, 2003
2002
Adeyinka, O. B., Naterer, G. F., “Apparent Entropy Production Difference with Heat and Fluid Flow Irreversibilities”, Numerical Heat Transfer B, vol. 42, no. 5, pp. 411 – 436, 2002
Naterer, G. F., Rinn, D., “Towards Entropy Detection of Anomalous Mass and Momentum Exchange in Incompressible Fluid Flow”, International Journal for Numerical Methods in Fluids, vol. 39, no. 11, pp. 1013 – 1036, 2002
Naterer, G. F., “Energy Balances at the Air / Liquid and Liquid / Solid Interfaces with Incoming Droplets at a Moving Ice Boundary”, International Communications in Heat and Mass Transfer, vol. 29, no. 1 (02), pp. 57 – 66, 2002
Naterer, G. F., “Multiphase Flow with Impinging Droplets and Airstream Interaction at a Moving Gas / Solid Interface”, International Journal of Multiphase Flow, vol. 28, no. 3, pp. 451 – 477, March, 2002
2001
Naterer, G. F., “Establishing Heat–Entropy Analogies for Interface Tracking in Phase Change Heat Transfer with Fluid Flow”, International Journal of Heat and Mass Transfer, vol. 44, no. 15, pp. 2903 – 2916, 2001
Naterer, G. F., “Applying Heat–Entropy Analogies with Experimental Study of Interface Tracking in Phase Change Heat Transfer”, International Journal of Heat and Mass Transfer, vol. 44, no. 15, pp. 2917 – 2932, 2001
Xu, R., Naterer, G. F., “Inverse Method with Heat and Entropy Transport in Solidification Processing of Materials”, Journal of Materials Processing Technology, vol. 112, no. 1, pp. 98 – 108, 2001
2000
Naterer, G. F., “Predictive Entropy Based Correction of Phase Change Computations with Fluid Flow – Part 1: Second Law Formulation”, Numerical Heat Transfer B, vol. 37, no. 4, pp. 393 – 414, 2000
Naterer, G. F., “Predictive Entropy Based Correction of Phase Change Computations with Fluid Flow – Part 2: Application Problems”, Numerical Heat Transfer B, vol. 37, no. 4, pp. 415 – 436, 2000